O

Operating message, is not a fault.
Blocking protection for the heating pump and diverter valve active.
The purpose of component kick is to ensure that hydraulic components such as pumps will not get stuck by giving these functional components a "kick", i.e. they are briefly turned on after a period of inactivity.
After power up every 24 hours the appliance will do a component kick, where the pump will run for 10 seconds.
If the appliance is already in a CH or DHW heat request, these heat demands will be prioritised over component kick. But once the heat demand has ended the component kick will take place.
If this causes nuisance then please power the appliance off and on again at a more suitable time; the daily kick will then occur at the time the appliance is turned on again.